HettCube Incubators
Efficient use of valuable space and more control with an intuitive touchscreen.
With the 43-inch touch screen, the HettCube series of incubators and cooled incubators guarantee intuitive operation with flexible and individual setting options and many new features.
The proven combination of natural and forced convection (HettCube 200, 400, 600) ensures stable and homogeneous temperatures in a much larger part of the interior than conventional incubators. This offers up to 30% more validated useful space with the same interior space. In addition, the high design of the HettCube incubators requires up to 50% less floor space with comparable capacity. Benchtop models (HettCube 60 and 120) offer a choice of natural or forced convection.
HettCube incubators (HettCube 200, 400, and 600) combine the advantages of natural and forced convection. The fan is housed outside the usable space, so there is a low airflow inside the incubator. Temperature is maintained by radiated heat, preventing the formation of hot spots. Benchtop models (HettCube 60 and 120) offer a choice of natural or forced convection.
HettCube benchtop incubators (HettCube 60 and 120) offer your choice of natural or forced convection.
Learn more about our benchtop incubators, HettCube 60 and HettCube 120. These compact incubators are available with your choice of natural or forced convection and come with various standard equipment and optional accessories.
After validation, most incubators lose up to 10% of their “useable” internal volume. The HettCube 200, HettCube 400, and HettCube 600 maximize their usable space.
Due to the HettCube’s gentle airflow and edge-to-edge temperature uniformity, they provide up to 30 % more validated usable space per DIN 12880:2007-05 than a traditional incubator with the same internal volume.
The HettCube’s upright design requires up to 50 % less floor space than a traditional incubator with a similar capacity. The space-saving footprint allows you to nearly double your capacity by accommodating two HettCube incubators within the same footprint as one conventional incubator.
HettCube design features make for an uncomplicated, trouble-free user experience.
The internal lining, drawers, and shelves are made of stainless steel and can be readily removed for thorough cleaning and autoclaving.
One bushing on the rear panel (42 mm opening) for independent measurements and external devices.
Our incubators are quieter than normal conversation when running, and will not increase the noise levels within your lab. A HettCube incubator has a remarkably low noise output of ≤ 44 dB(A).
Get higher loading capacities in less space by using the special inserts. Our rack for Petri dishes and the Loewenstein shelf, allows large numbers of cultures to be processed quickly and economically. They provide more space, clear order and comfortable handling.
HettCubes need only one door and do not require an inner door. This allows for actual one-hand operation. A HettCube incubator will close automatically at an opening angle below 90°. A magnetic mechanism assists this automatic closing.
The HettCube 400 and 600 models have heavy-duty casters for moving them to the desired position. Once in place, they can be fixed with adjustable feet.
The door does not require space at the side to open. This means the incubator can be positioned in a corner or near other lab equipment. The door hinges can be easily swapped from one side of the incubator to the other.
The practical door-locking mechanism locks both the door and the control panel at the same time. This prevents inadvertent changes to parameters and harmful effects on samples.
The stable telescopic rails of the Hettich Tray System (HTS) can be extended up to 70% horizontally. This allows you to reach the samples easily in every corner.
Temperature fluctuations are actively and immediately compensated for.
HettCube with glass door condensation diagram.
HettCube incuabtors are safe for the ennvironment both inside and out.
At an operating temperature of 37 °C, a HettCube incubator consumes less than 0.05 kWh.
With an advanced control system and water-driven foam insulation, HettCubes will maintain a constant set temperature even if there is a difference of only 1 °C from ambient temperature.
HettCubes comply with all relevant safety and regulatory standards and come with a HettCert 9-point factory certificate.
Standard/heated incubators and cooled incubators with touchscreen
Internal volume (L) : 56
Temp. range: +5 °C to +65 °C (Natural) | +7.5 °C to +65 °C (Forced)
Internal volume (L) : 112
Temp. range: +5 °C to +65 °C (Natural) | +6.3 °C to +65 °C (Forced)
Internal volume (L) : 150
Validated usable volume (L) : 82
Temp. range: incubators | cooled incubators: 1K above ambient temp. up to +65 °C | 0 °C up to +65 °C
Internal volume (L) : 310
Validated usable volume (L) : 199
Temp. range: incubators | cooled incubators: 1K above ambient temp. up to +65 °C | 0 °C up to +65 °C
Internal volume (L) : 520
Validated usable volume (L) : 351
Temp. range: incubators | cooled incubators: 1K above ambient temp. up to +65 °C | 0 °C up to +65 °C
See our complete line of HettCube incubator accessories and optional equipment.
Show meBelow are resources to help you get familiar with the HettCube line of incubators.
This product sheets provides a comprehensive overview of the unique product features specific to the model. (more…) read more...
This product sheet provides a comprehensive overview of the unique product features specific to the model. (more…) read more...
This brochure provides a detailed overview of the product features, benefits and components. (more…) read more...
About Hettich HettCube Incubators | Animated Video Learn why HettCube is the new benchmark in standard and cooled incubators. HettCube incubators make efficient use of valuable space by providing up to 30% more validated useable space for cultures than incubators with similar capacity. Incubators without cooling operate at just 1°C read more...
Please find all articles, videos, downloads, and more in the Resource Library.
To help you choose the right incubator for your lab, we created a quick laboratory incubator guide to help narrow your choice.
Fill out the form below for product support, questions, or comments, and we will get back to you as soon as possible.